Pele 12W LED 3K/4K Track Spot Light

Aluminium

Care Requirement - Regular maintenance and scratch protection 

Cleaning Guide - Metal surfaces should be cleaned every 1–2 weeks to maintain their finish and prevent dust or residue build-up. Gently wipe with a soft, dry cloth to remove surface dust and fingerprints. For stains or signs of tarnish, use a metal cleaner suitable for the specific finish, applying it carefully to restore the surface without causing damage. 

Placement Guide - Metal finishes should be positioned in areas with medium sunlight exposure, with indirect light preferred, as prolonged direct sunlight can cause surfaces to heat up and potentially discolour over time. These materials have moderate tolerance to saltwater environments, however regular exposure may accelerate wear if not maintained. Metals can generally withstand higher proximity to heat sources, making them suitable for a range of interior applications. They also perform well in higher humidity environments, though proper ventilation is recommended to minimise the risk of corrosion over time. Repositioning is not required, as metals maintain their form and structure in place. 

Deep Cleaning Guide - Metal finishes should be deep cleaned every 6 months or as needed to maintain their appearance and longevity. For iron and aluminium, use a mild soap solution with warm water and a soft cloth to gently wipe down the surface. For stainless steel, apply a dedicated stainless steel cleaner to remove smudges, then polish with a microfibre cloth, always wiping in the direction of the grain to preserve the finish. Avoid using harsh chemicals such as bleach, ammonia or solvent-based cleaners, as well as abrasive materials like steel wool, which can damage the surface. Refrain from harsh scrubbing or forceful cleaning, particularly on delicate finishes, and do not expose metals to solvents, oils or petroleum-based products. DIY cleaning methods such as vinegar or baking soda should also be avoided, as they may compromise the integrity of the finish. 

IP20 is protected against solid objects larger than 12mm (like fingers) but has no protection against water

View Our Care & Maintenance Guide

Does the Pele 12W Track Light include a light source? 
Yes. The Pele Track Light features an integrated 12W LED light source, so no globe is required. It produces approximately 946–1129 lumens depending on the finish, with a CRI of 90 for accurate colour rendering and high-quality illumination. 

What beam angles are available for the Pele Track Light? 
The Pele Track Light is available with 24° or 36° beam angles. A 24° beam provides a tighter spotlight effect ideal for highlighting artwork or architectural features, while a 36° beam offers a wider spread suitable for general accent lighting. 

Is the Pele 12W Track Light compatible with all track systems? 
No. The Pele 12W Track Light is designed for Three Wire Single Circuit track systems only. This is a common track configuration used in residential and commercial lighting, allowing multiple fittings to operate on the same circuit while still being repositioned along the track as needed.