Paz LED Step Light

Aluminium

Care Requirement - Regular maintenance and scratch protection 

Cleaning Guide - Metal surfaces should be cleaned every 1–2 weeks to maintain their finish and prevent dust or residue build-up. Gently wipe with a soft, dry cloth to remove surface dust and fingerprints. For stains or signs of tarnish, use a metal cleaner suitable for the specific finish, applying it carefully to restore the surface without causing damage. 

Placement Guide - Metal finishes should be positioned in areas with medium sunlight exposure, with indirect light preferred, as prolonged direct sunlight can cause surfaces to heat up and potentially discolour over time. These materials have moderate tolerance to saltwater environments, however regular exposure may accelerate wear if not maintained. Metals can generally withstand higher proximity to heat sources, making them suitable for a range of interior applications. They also perform well in higher humidity environments, though proper ventilation is recommended to minimise the risk of corrosion over time. Repositioning is not required, as metals maintain their form and structure in place. 

Deep Cleaning Guide - Metal finishes should be deep cleaned every 6 months or as needed to maintain their appearance and longevity. For iron and aluminium, use a mild soap solution with warm water and a soft cloth to gently wipe down the surface. For stainless steel, apply a dedicated stainless steel cleaner to remove smudges, then polish with a microfibre cloth, always wiping in the direction of the grain to preserve the finish. Avoid using harsh chemicals such as bleach, ammonia or solvent-based cleaners, as well as abrasive materials like steel wool, which can damage the surface. Refrain from harsh scrubbing or forceful cleaning, particularly on delicate finishes, and do not expose metals to solvents, oils or petroleum-based products. DIY cleaning methods such as vinegar or baking soda should also be avoided, as they may compromise the integrity of the finish. 

IP20 is protected against solid objects larger than 12mm (like fingers) but has no protection against water

View Our Care & Maintenance Guide

Does the Paz Step Light include a light source? 
Yes. The Paz Step Light features an integrated LED light source, so no globe is required. It uses approximately 1W of power and produces around 30 lumens at 3000K, delivering a warm, subtle glow ideal for low-level lighting 

What type of lighting effect does the Paz Step Light create? 
The Paz Step Light is designed to create a soft downward glow, illuminating the surface below while keeping the light source concealed. Its hooded design helps reduce glare and produces a gentle guiding light for steps, corridors, and walkways. 

What cut-out size is required for installation? 
The Paz Step Light requires a 22mm cut-out and has compact dimensions of 25mm diameter by 35mm height, making it ideal for discreet recessed installation in walls or stair risers where minimal visual impact is desired. 

What is the housing used for with the Paz Step Light? 
The Paz Step Light is designed to be installed using a recessed housing, which is placed into the wall during installation. The housing acts as the mounting cavity that holds the light securely in place, protecting the fitting and ensuring a clean recessed finish. It also allows the light fitting to be easily installed or removed for maintenance while keeping the surrounding wall surface neat and unobtrusive.